Phone: +34 948 107666   Mail: amlighting@amlighting.eu

Ilumination

   LIGHTING FIXTURES

LUMINACION2

AM-LIGHTING has a wide variety of lighting fixtures, taylor-made and commercial types designed according to customer requirements:

All our design are based on luminaire features such as:

 - Type: spots, LED strips, recessed, corner, central, anti-vandalism, folding, waterproof, easy maintenance, etc ...

 - Light source: LED or fluorescent. In the case of LED, we design and manufacture our own LED strips, T8-LED Tubes and drivers with high performance components. 

- Light transmission: polycarbonate diffusers under demanding compliance with fire regulations and tempered glass in all types of finishes. 
 
We also provide photometric studies of our design proposals based on 3D models of the fixture and the interior.

All our lighting fixtures and their components meet European standards concerning electrical, photometric, fireproof, maintenance and security issues, such as ECE-R10,NF-F-16101, EN45545-HL2, EN13272, ...

 

     LEDLINE PROFILES

PERFILESLUMINOSOSNUEVO

 

We also design and manufacture aluminum profiles with built-in LED lighting in different finishes and fully waterproof with a long service life. 
Both, epoxi and color LEDs can be supplied in different colors according to the desired specification or application. 
 
The fields of application are different:  
- Vehicle entrance, walkways, floors and exit step area illumination. 
- Visual effects in interior/exterior places.  
 
Our standard profile is mounted easily on the edge of the step, in order to establish a visual aid to the passenger at any angle and also a nice finish in the interior of the vehicle.

These profiles have an easy fastening using special adhesives or screws. 

Taylor-made designs can be provided according to an specific aluminum profile, color, dynamic effect, AC/DC supply voltages and so on.

 

   LED DISPLAYS

ILUMINACIONLED16DEFI

 

Our interior displays provide indoor static or dynamic information. The lighting source is LED and the panel may be non-degradable polycarbonate or vinyl mounted on aluminum housing.
In the case of dynamic information indicators, we have digital clocks with thermometer function included (+ temperature probe). The housing design is in accordance with the customer requirements although we have standard types.
They are normally used for indoorapplications, such as toilet signalers, emergency exits, time and temperature information, etc.
 
We can also design and manufacture products under request for special requirements and/or different supply voltages.

 

 

 

Click here to get in touch with us now and we'll be very pleased to give you detailed information and kindly assist you.

Converters

 

   DC/AC CONVERTERS (INVERTERS)

 

Electronic ballasts are DC / AC converters designed to allow the ignition and operation of fluorescent lamps with the greatest possible efficiency and durability. We have two families of electronic ballasts:
 
- COMPAK-Series. This family is an economical, well proven and very reliable solution for every application in which the power supply source is constitued by a battery or group of them (12V, 24V and 48Vdc) mounted on static or mobile locations (vehicles). It meets the requirements of the EMC Directive 2004/108/EC and those of the EN 55015 Standard that lays down the related permissible limits. It is also certified and e-marked
according to the directive 2004/104/EC (old 95/54/EC). 
The most common applications are:
1) The interior lighting of any vehicle, both public transportation (mostly bus & coach), industrial use or service vans.
2) The lighting of dwellings from the tension generated in solar batteries.
 
- BALCON-Series. This family is specially designed for railway applications where DC power source (battery) is 24V, 72V or 110VDC, and the operating conditions are very demanding in terms of vibration, temperature, switching cycles (over 500.000 with the same lamp), compatibility and electromagnetic immunity, performance, etc ...
The most common applications are:
1) Interior lighting for passenger departments, platforms and cabs (metro, trams and intercity trains)
2) Interior lighting for cabs and engine rooms in locomotives
 
Besides our commercial types we also design and manufacture taylor-made inverters according to customer specifications. Within our commercial range there are different models depending on: type and number of lamps/LEDs, supply voltage requirements, dimming, isolation grade, ...
This robust family is designed according to the current international railway standards like UIC 555.1,EN 50155, IEC 60571 and EN 50121-3-2.

convertidores

 

    DC/DC CONVERTERS

 

The purpose of these equipment is to convert the input voltage into another voltage level at the output at a specified output power. The output voltage can be bigger or smaller than the input's and so we can talk of Boost(Step-up) or Buck(Step-down) DC/DC converters. The technology of buck types can be either linear (dissipative) or PWM (pulsating) type. For the boost types the only possible technology is PWM. Within PWM technology there are also many different topologies.

Linear technology, although it has lower performance and thus less extended, is suitable for low power application where economy, simplicity and lack of EMI filters are key design issues.
 
Besides our standard types (linear, step-down), we also design and manufacture converters according to customer specifications.
 
All our models meet European standards.

 

 

    u40 normal

  

Click here to get in touch with us now and we'll be very pleased to give you detailed information and kindly assist you.

Certifications

certificaciones2

AM está certificada en todos los procesos de calidad (ISO/TS 16949), así como en otros relacionados con la compatibilidad electromagnética de los productos fabricados y los componentes utilizados en los mismos (EN50121-3-2, 95/54/EC, 95/28/CE, EN45545-2,..). Disponemos de certificación por centros oficiales homologados, tales como APPLUS.

Todos los componentes utilizados en la fabricación de nuestros productos reúnen las características más exigentes de acuerdo a sus condiciones de trabajo.

Contactors

 

   RELAY BOXES, HANDLES & INTERFACES

 CONTACTORESNUEVA

We are market leaders in the manufacture of contactors for electromagnetic brakes (retarder). Our family of relay boxes are distinguished by their reliability and robustness, supported throughout the years by leading chassis manufacturers worldwide. We comply with the eletromagnetic compatibility certification according to ECE REGULATION NR10 and European Directive 2009/19 / EC.
According to the required braking performance and battery voltage, 12 or 24V, there are different types available.  
Some other components are complementary to the braking system, such as interfaces and manual handles that allow a full functionality and performance of the brakes. Within the interfaces we have ABS system integration and low speed meter to disable the braking action.

 

   

freno1

Freno eléctrico (RETARDER)

   

Click here to get in touch with us now and we'll be very pleased to give you detailed information and kindly assist you.

PROJECTS WE ARE IN:

SHORT DISTANCE TRAIN, SUBWAY AND TRAMWAY

LOCOMOTIVES

MEDIUM & LONG DISTANCE TRAIN

BUS & COACH

TRUCK & INDUSTRIAL VEHICLE

AMBULANCE & SERVICE

 

OUR CUSTOMERS

                                      skoda    pesa   

 cojali         man       solaris    aps stadler

                                           

                                                  castrosua